- HardNess
-
Metallurgical Equipment
- Metallographic sample cutting machine series
- Metallurgical mounted machine series
- Grinding machine
- Metallographic grinding prototype, polished machine, pre-mill series
- Polishing machine
- Metallographic polishing machine, grinding and polishing machine series
- Microscope
- Metallographic analysis system
- Electrolytic polishing corrosion tester
- Sample blower
- End quenching equipment
- Metallurgical Material
Contact：Miss zhang
Phone：021-51083791
Fax：021-51083792
Mobile：18930516192
Email：teshi@teshish.com
LP-2T Metallographic Polishing Machine
Product Usage:
In the metallographic sample preparation process,the sample pre-grinding,so essential before polishing procedure.Firstpre-grinded specimen,can greatly improve the effectiveness of sample preparation,LP-2B model pre-grinding machine,through a wide range of research and acquisition,and use many people’s views and requirements designed to adapt to more pre-ground material needs,is an excellent specimen pre-grinding equipment.
LP-2T type pre-grinding works first by the water through the pipes,continuous inflow rotating disc，At this time,floating in the water in sandpaper rotating disc
under centrifugal force,the water will be thrown under the sandpaper disc,the formation of a vacuum,atmospheric pressure put sandpaper tightly pressed on the disk,you can pre-grinding operation,when the disc rotation stop after the loss of this role,then sandpaper can be freely removed.
Main technical specification
| Item | specification |
| Working disc diameter | Standard φ230mm(option:203mm) |
| Rotate speed | Left:600r/min right:800r/min |
| Motor | 0.55kw |
| Power supply | Voltage：AC 380V 50HZ |
| Dimension | 670×710×340mm |
| Weight | 46kg |
